Taito marquee & bezel sizes?

scottmaggie

Well-known member

Donor 4 years: 2011-2013, 2024
Joined
Jun 8, 2011
Messages
2,773
Reaction score
77
Location
Philadelphia, Pennsylvania
Can someone let me know the correct sizes for a Taito marquee & bezel. In particular for Zoo Keeper.

Also for the ZK bezel I need the size of the cut out and distances from the edges please.

Thank you in advance!
 
Can someone let me know the correct sizes for a Taito marquee & bezel. In particular for Zoo Keeper.

Also for the ZK bezel I need the size of the cut out and distances from the edges please.

Thank you in advance!

I am pretty sure the marquee is 22 3/4 x 6 3/4. I would have to measure the bezel.
 
oh boy...

So I got 2 different measurements for the marquee from people...
22-3/4" x 6-3/4"
and
22-1/2" x 7"


I got a bezel measurement of:
22-1/2" x 21-3/4" with the cutout 13" x 16" placed 5-3/4 from the top and equidistant from the sides

Crap. I don't want to get this stuff done twice. :0)
 
The height of my marquee measurement may be off. I didn't have the torx screwdriver around when I measured for you, so I couldn't take it out.

I did take the bezel out and measure it.

The width of the bezel and marquee should be the width of the cabinet, minus a little bit so that it can slide in.
 
ok so measured my cab and...

Measured my empty cab for comparison and:

Marquee appears to be
22-3/4" wide x 6-3/4" high


I got a bezel measurement of:
22-3/4" wide x ? high
(still not 100% sure on height or size/placement of cutout. Can someone confirm if 21-3/4" high with the cutout 13" x 16" placed 5-3/4 from the top and equidistant from the sides is correct)

The 22-3/4" width is definitely correct as I triple checked the width of my control panel...
 

Attachments

  • zk cpo.jpg
    zk cpo.jpg
    99.4 KB · Views: 8
Confirmed sizes!!!

Thanks to all-around-good-guy Anthony at Quarterarcade for measuring on an actual Zoo Keeper marquee & bezel!!

Marquee:
22-3/4" wide x 6-3/4" high

Bezel:
22-9/16" wide by 21-11/16" tall (maybe 21 3/4")
Monitor cutout:
3" from bottom 5-5/8" from top
2-9/16" from either side
(Remember that the bezel slides into those plastic glides which is why it is a little less wide than the marquee.)
 
Back
Top Bottom