Taito Interlock issue...

jonathan1138

Active member
Joined
Jul 20, 2010
Messages
1,648
Reaction score
7
Location
Whitestone, New York
Hi all - thanks in advance for any help.

Just got a Taito Frontline cab - took it down completely (cleaned Everything, repainted, restenciled). Looks a whole lot better now (will get around to pics).

Now, i have her all back together and am stuck on something.

The game wont power on unless the Back door interlock and coin door interlock are pressed in. Is that normal? I usually expect the back interlock only to affect cutting power....

To solve it, I had to move the back interlock back an inch (since i had the door off for repaint / now mounting the same as before).

The back interlock now "clicks" (closes) when i shut the door. BUT, the coin door switch - it is always opened due to the way it mounts - to the left of the coin door, not making contact with anything . There is now way to close it, unless i open the coin door and press it in (manually).

What am i doing wrong here? This is the way the game was originally connected when i got it.....
 
The interlocks are working properly. Most interlocks can be pulled out in order to close the contacts and effectively bypass the interlock. They lock into place when pulled out.
 
Back
Top Bottom