Taito Ice Cold Beer Solenoid?

ChompingQuarters

Well-known member
Joined
Oct 18, 2006
Messages
10,196
Reaction score
68
Location
Clinton Township, Michigan
I've read the manual but cannot figure out the specs on the Ice Cold Beer solenoid. I'd like to order an extra with a new sleeve (The sleeve is not smooth) and there is not any markings on the solenoid itself.

If anyone can help out and let me know what it uses that would be great.

http://www.pbresource.com/coils.html

Thanks.
Bill

attachment.php
 

Attachments

  • photo.jpg
    photo.jpg
    77.7 KB · Views: 112
Ok, finally figured out the number on the solenoid. It is N-26 1200.

I assume this is a STN-N26-1200 / Coil N26-1200 @ $6.93 each. Located on this page http://www.pbresource.com/coilccm.html .

I'd also like a new sleeve. It looks like the Bell/ChimeUpkicker Coil Sleeve looks like these http://www.pbresource.com/coils/sleeveb.jpg ...

A Dimension is approx. 1-3/8"
B Dimension is approx. 1-5/8" (1/4")

I'm sure I can trim the sleeve down... Just need it to be smooth.

I'm waiting on a e-mail back from pbresource so if anyone knows where else I can get this let me know.
 
Back
Top Bottom