FS Parts: Taito Gladiator PCB

SCUBA King

Well-known member

Donor 6 years: 2020-2025
Joined
Dec 3, 2020
Messages
9,353
Reaction score
7,838
Location
South Lyon, Michigan
Rating - 100%
110   0   0
Has two issues I can find.

Will boot to nvram bad error some times, but if you press down on daughter board near CN1 it will boot. I reflowed both sides on connector, no change. I put devout in female side of connector also to see if pins are dirty. Haven't spent much more time on it.

Has graphics issues once it does boot in sprites, backgrounds all look good.

$100 shipped PPff
$130 shipped PPgs
 

Attachments

  • image.jpg
    image.jpg
    344.2 KB · Views: 11
  • image.jpg
    image.jpg
    384.1 KB · Views: 9
  • image.jpg
    image.jpg
    421.3 KB · Views: 8
  • image.jpg
    image.jpg
    418 KB · Views: 6
  • image.jpg
    image.jpg
    335.1 KB · Views: 6
  • image.jpg
    image.jpg
    307.9 KB · Views: 8
  • image.jpg
    image.jpg
    732.9 KB · Views: 11
Back
Top Bottom