Taito F3 Asia region - missing capactior and need info

tomwaits

Member
Joined
Mar 7, 2009
Messages
88
Reaction score
3
Location
Lunenburg, Massachusetts
Taito F3 Asia region - missing capacitor and need info

I have a Taito F3, Asia region if that matters, and it has a broken off component at C27. It's along the right edge of the PCB near the small SW1 pushbutton. Could someone tell me what's supposed to be there or a link to a schematic?

Thanks!
 
Last edited:
C27 is an electrolytic capacitor, 220uf 16v. If you look just above pin 1 of the JAMMA connection, you'll see C52 and C47 which are the same type and orientation as C27 should be.
 
I bought it cheap, 'as-is' with a broken component. Didn't want to risk trying it until I added that cap just in case it was necessary. Anyway, I put a 220uF 16V cap on it today and it's working fine.

Thanks for the info!
 
Back
Top Bottom