TAF playfield/cabinet bolt and pivot nut size

elfyhead

New member
Joined
Aug 14, 2010
Messages
697
Reaction score
6
Location
New Mexico
what size is the black bolt that goes through the side of the cabinet and holds up the playfield on an addams family? 3/8", 1/2", 11/16", other? the ones in there now are 3/8", and 3/4" long, but look like they aren't the right size (they're too short, and seem loose).

also, mine is completely missing the pivot nuts (sigh). on my funhouse, the pivot nuts look like in the attached picture, but the only ones i can find for sale are like the ones at: http://www.planetarypinball.com/mm5/merchant.mvc?Store_Code=PP&Screen=PROD&Product_Code=PPS-02-4329 - i.e., they don't have that flanged bit on the end. does anybody sell the ones like i have in the picture below?
 

Attachments

  • pfNut.jpg
    pfNut.jpg
    72.8 KB · Views: 18
nevermind - should have poked on r.g.p first - found my answers stashed in the archives there :). for the pivot nut type (TAF, vs. the bushing type of FH), i need:

3/8-16 x 1-1/4" carriage bolt - e.g., http://www.marcospecialties.com/product.asp?ic=4322-01123-20B

and

11/16" pivot nut - e.g., http://www.marcospecialties.com/product.asp?ic=02-4329-2

for FH, replace the 1-1/4" bolt with a 1-3/4" (e.g., http://www.marcospecialties.com/product.asp?ic=4322-01123-28B), and i didn't find a replacement for the bushing anywhere (in fact there were a number of posts on r.g.p with similar lack of luck finding a replacement for it).
 
Back
Top Bottom