discgolfer72
New member
just took a t2 in on trade
after wiping 2 inches of goo off the monitor screen
the game fires right up but had a cmos error about gun calbration
so i enterd the test menu and everything is working excpt the player 1 trigger
i swaped the harness over from gun 1 to gun 2 and the problem stays with the gun not the harness so the problem has to be inbetwene the gun 1 trigger nad where it hooks up to the harness
before i crack this puppy open anything i should look for
i do see a thick ground wire that has been cut but it looks like a standard green groind chain wire
after wiping 2 inches of goo off the monitor screen
the game fires right up but had a cmos error about gun calbration
so i enterd the test menu and everything is working excpt the player 1 trigger
i swaped the harness over from gun 1 to gun 2 and the problem stays with the gun not the harness so the problem has to be inbetwene the gun 1 trigger nad where it hooks up to the harness
before i crack this puppy open anything i should look for
i do see a thick ground wire that has been cut but it looks like a standard green groind chain wire