System I Control Panel help (PPR/Indy)

shilmover

Well-known member
Joined
Oct 28, 2007
Messages
5,073
Reaction score
586
Location
Washington
All,

I am trying to get my Indy Jones Control Panel working. I have to build a harness for it as it was missing. I did that but its not working. Here is what I am seeing:

Indy:
- buttons work
- Joystick does not work

PPR
- buttons work for start, but nothing else
- Joystick does not work
- putting it in test mode: Joystick test shows as working (they read 8x open and 00 closed)

Any ideas? Anyone have pictures of how the harnesses for each of these CPs are hooked up?
 
I'm pretty sure that for the joystick to work, you have to short the leaf switches to +5v, not Gnd. One of the pins in the bank for the joystick should be +5v.
 
I'm pretty sure that for the joystick to work, you have to short the leaf switches to +5v, not Gnd. One of the pins in the bank for the joystick should be +5v.

You are correct. I tried that and now I have a working Indy CP. Now to move onto the Peter Pack Rat. I need to rebuild the base. Anyone have any parts for this? old base?
 
Back
Top Bottom