System I Cabinet measurements

shilmover

Well-known member
Joined
Oct 28, 2007
Messages
5,073
Reaction score
586
Location
Washington
I need to re-apply the black vinyl to my System I Cab (I got it stripped).

I need to order some of the vinyl from TOG so that I can do this project over the holiday, but I could not get to my cab this morning.

Anyone happen to have access to one where you can quickly give me the measurements (dont have to be exact). Height, side width, front width.
 
Looks like i found it from the flyer:

Height 70"
Wdith: 25 1/4"
Depth: 34.5"

Just measured mine (wanted to verify this for ya)...

H & W are correct, but the width is from outer edge to edge. It's acually 23 3/4" between the T-Molding (or inner edge to edge). I cant get a good measurement on depth because the control panel in front along with the monitor and bottom "hump" in the back are in 3 different places, but 34.5" sounds about right for the deepest point.
 
Just measured mine (wanted to verify this for ya)...

H & W are correct, but the width is from outer edge to edge. It's acually 23 3/4" between the T-Molding (or inner edge to edge). I cant get a good measurement on depth because the control panel in front along with the monitor and bottom "hump" in the back are in 3 different places, but 34.5" sounds about right for the deepest point.

Thank you much! It is appreciated...
 
Back
Top Bottom