System 2 Q?

micksimmonds

New member

Donor 4 years: 2011, 2013-2015
Joined
Dec 28, 2005
Messages
3,754
Reaction score
27
Location
UK, United Kingdom
System 2 Question for Paperboy/Championship Sprint

Okay I have a Championship Sprint System 2 setup, picked up from fellow KLOV'ers a Paperboy CP and a PCB, hooked up the PCB and aside from one gfx issue works fine, but go to hook up the CP and the pinouts and connectors are off? I figured this was plug and play? am I missing a part of the harness? anyone done the swap before? thanks
 
Last edited:
looking at the plugs, CS has one plug from the main harness (big old 13 pin Atari connector) and that plugs directly into the control panel harness, whereas Paperboy has the same number of wires used, just in a much smaller 6 pin connector and 4 pin connector, so where these not interchangeable? or can someone make an adaptor to convert one to the other, or is it not that easy?

after looking at the manual for Paperboy which shows the big 12 pin Atari Plug, I guess the one I have was modded ??? anyway anyone that has a Paperboy could you reference the pinout (in easy terms) please :)
 
Last edited:
Back
Top Bottom