Swapping from wells 6100 to amplifone question

irobot

Active member
Joined
Jul 29, 2007
Messages
464
Reaction score
46
Location
Pennsylvania
So I finally got around to putting a flyback on my amplifone monitor and now I want to stick it in my start wars.

The thing is, the wires to the big connector to the wells are all chopped and hacked and taped. But the machine works fine with the wells.

The amp has a three plug connector with only two wires going into it. what plugs into it?

So to make a long story short, anybody got a connection diagram or pictures they could share?

Because I know jack shit about this topic and jack already left town.

I want to make sure everything is all wired up correctley so I don't fry my amplifone.
 
So I finally got around to putting a flyback on my amplifone monitor and now I want to stick it in my start wars.

The thing is, the wires to the big connector to the wells are all chopped and hacked and taped. But the machine works fine with the wells.

The amp has a three plug connector with only two wires going into it. what plugs into it?

So to make a long story short, anybody got a connection diagram or pictures they could share?

Because I know jack shit about this topic and jack already left town.

I want to make sure everything is all wired up correctley so I don't fry my amplifone.

Check out the link in my signature :)
 
If all you did was put a new flyback on it and hope everything else is good, then you probably will fry it.

The whole thing's been recapped and done over. Everything I do always comes out right because I make sure I know what I'm doing first. Takes forever sometimes, but that's the price you pay.
 
Check out the link in my signature :)

Great site, thanks.

I'm going to post up some pics and maybe you guys can help money see monkey do me through it.

The think I'm afraid of is some sort of hack job that didn't bother the wells but might mess up the amp.
 
Back
Top Bottom