Swapping a Flyback on a WG 4900

gooze

Member
Joined
Oct 19, 2008
Messages
121
Reaction score
0
Location
Fountain Hill, Pennsylvania
I have 2 WG 4900 chassis's. One is in great condition but the flyback and been cut the other is a nightmare, but the flyback looks good.

I wanted to ask before I attempted, are the only solder spots the 1 through 10 circle?

Any help would be greatly appreciated.
 
I believe you have two screws on top for the support bracket, then the desolder the flyback pins. You'll also need to open the neckboard connector and desolder the white focus wire.
 
Back
Top Bottom