copious
Well-known member
I have the Speath ESB / SW kit and occasionally my board set would act up. And by act up it would loose the tie fighters and background images. I fought with this problem from months and last night I finally found it. Granted I both spoke to and cursed Mark in the process and he always convinced me it was the PCB and not the Kit.
Here's what I found…..
I always measure the +5 at the PCB, I dialed it in to 5.01 PERFECT I thought. Then I started thinking of the voltage that would transverse the 3 PCB set and thought maybe I should adjust the +5 for a little more. Well that fixed it setting it to 5.08 everthing returns to normal operating mode.
Here's what I found…..
I always measure the +5 at the PCB, I dialed it in to 5.01 PERFECT I thought. Then I started thinking of the voltage that would transverse the 3 PCB set and thought maybe I should adjust the +5 for a little more. Well that fixed it setting it to 5.08 everthing returns to normal operating mode.
