Super Pacman

AAirhart

Well-known member

Donor 2011-2012
Joined
Jul 1, 2011
Messages
1,932
Reaction score
17
Location
Crafton, Pennsylvania
Does anyone on here burn roms for sale?
I need a 2F for my Super Pacman (picked up the same night as my currently dead SI Deluxe).

This game was trashed.
It looked like it spent a little time outdoors. The back door was smashed in, the cabinet was full of leaves, dirt, spiders and an entire spilled box of nails. All wiring was either disconnected or shredded.

After a day of cleaning it up and repairing the wiring, I fired it up and got to the self test stating ROM 1 being bad. Pretty good for all of the other issues.
 

Attachments

  • DSCN13892.jpg
    DSCN13892.jpg
    80.5 KB · Views: 12
  • DSCN13822.jpg
    DSCN13822.jpg
    79.8 KB · Views: 12
Last edited:
$7 shipped USPS Priority or $4.50 parcel post in a bubble mailer(eprom in tube).
I accept paypal at pacman@ md.metrocast.net ....remove space in email.
 
Cool. I'll get it sent over Thurs evening (little over budget until payday....I blame Daytona USA 2).
Know anyone who sells 8080s (need 1..maybe 2 so i have a spare) and/or any of these AM9060, D2107C, UPD411, MM5280, TMS4060 (thinking I'll need at least 8 for another project)
 
This afternoon I swapped the video board from my dead Super Pac board set. Success!! I have sprites...and of course the monitor crapped out on me soon after (screwy colors, jiggle the cable and they return or screen goes weird...could be monitor, could be cable) so..another project for another day.
 
Update.. it is the monitor and the cable.

Broken sync line on the cable - Fixed..
And pretty much every line to the neckboard is accompanied by a broken solder joint... so, who wants to stop by and discharge a monitor?
 
If your only working on the neckboard you can get by without discharging. Chances are you need to reflow the input header on the chassis too.
 
Back
Top Bottom