Suggestions on CPO for Heavy Barrel?

OldTymeToys

Well-known member

Donor 3 years: 2011, 2013, 2018
Joined
Apr 2, 2009
Messages
12,839
Reaction score
1,142
Location
Canonsburg, Pennsylvania
I converted my Dynamo cab that used to be POW to a Heavy Barrel:
heavybarrel+007.jpg


So I originally I thought I wanted to do this like I've seen Heavy Barrels before with the generic Data East cpo:
5148_0_fs.jpg


But while looking at mamemarquees, I can across this one which I thought might look cool:
med-Generic%20Military%20CPO.jpg


Suggestions? Other ideas?
 
I converted my Dynamo cab that used to be POW to a Heavy Barrel:
heavybarrel+007.jpg


So I originally I thought I wanted to do this like I've seen Heavy Barrels before with the generic Data East cpo:
5148_0_fs.jpg


But while looking at mamemarquees, I can across this one which I thought might look cool:
med-Generic%20Military%20CPO.jpg


Suggestions? Other ideas?

I like the army action one myself. Then there's always the third option:

IMAG0003.jpg
 
I'd go with the Data East overlay. The generic military one doesn't match with the look of the guys in the bezel.
 
I'd go with the Data East overlay. The generic military one doesn't match with the look of the guys in the bezel.

Perhaps he could get some of those magnetic doll clothes to place over the green fatigues? They must sell both red and blue camouflage jumpsuits at one of the craft stores. Oh this will be simply grand when complete.
 
Perhaps he could get some of those magnetic doll clothes to place over the green fatigues? They must sell both red and blue camouflage jumpsuits at one of the craft stores. Oh this will be simply grand when complete.

But where will I find the gray armor and cod piece?
 
Heavy Barrel marquee and bezel are available on joymonkey's art site for those with access...

...shoot me an FTP server or some place else to upload a larger file and I'll send `em along.
 
Heavy Barrel marquee and bezel are available on joymonkey's art site for those with access...

...shoot me an FTP server or some place else to upload a larger file and I'll send `em along.

That would be awesome Frizz! Can you send it via yousendit.com? My email is [email protected]. I don't know of another way for me to get it, unless Zorg uploads it to his site...
 
OK, here's a first draft of my custom Heavy Barrel cpo for my Dynamo corner cut panel:
attachment.php


attachment.php


Thoughts & suggestions?

Does anyone have a Dynamo outline template for a cpo that I could use to lay over this file?
 

Attachments

  • Heavey Barrel custom cpo.jpg
    Heavey Barrel custom cpo.jpg
    103.4 KB · Views: 299
  • heavy barrel 2.jpg
    heavy barrel 2.jpg
    92.3 KB · Views: 106
Once again.... BRAVO!!!

I assume the three buttons are so you can go back and install other jamma games into it.

Here's a quick 3D mockup of how it will look if your CPO is printed at 24" x18", hope it helps give you a good reference point.






picture.php


NOTE: I trimmed your lower gray grid section just above the caution area. My bad.
 

Attachments

  • oldtymetoyscustom.jpg
    oldtymetoyscustom.jpg
    97.9 KB · Views: 19
Thanks fellas! I put it together tonight while I had 20 minutes to kill.

Once again.... BRAVO!!!

I assume the three buttons are so you can go back and install other jamma games into it.

Here's a quick 3D mockup of how it will look if your CPO is printed at 24" x18", hope it helps give you a good reference point.

Yep, there are 3 buttons now so I thought leave them for future jamma games.

That 3D model rocks!!! Can you upload it to google sketch up for me?? I'd love to see it in my virtual game room.
 
Back
Top Bottom