MonsterBash
Well-known member
Link incase the embedded stuff doesn't work:
http://www.youtube.com/watch?v=tmykfZPpuIs
The monitor was capped
The cable from the board to the monitor was replaced with w Bob Roberts cable.
I've tried so many different CPU and ROM board in this thing to solve a sound issue I can rule that out
The B+ voltage was 'in specs'. I checked it about a month ago using Randy Fromms stuff but I don't remember the numbers
A special thanks to KevinMullins for the focus POT he sent me to replace the one that crumbled in my hand
The lines aren't always visible when the machine is first turned on..but always show up about 5 minutes
Pins were re-flowed on the neck board and the 'card'
Other than those lines the monitor is super crisp and in real nice shape
Now I know just about enough to get myself into trouble so don't get to crazy technical on me...I am trying to learn.
Thanks!
Last edited: