BplaysGames
New member
I have a Subroc 3D that I recently picked up from a warehouse that I would like to part with. When it was bought the power supply was dead and my repair guy couldn't get it to function again so he put a new happ switching power supply in it. After getting the game to power on the monitor was obviously toast, even after a cap kit and new flyback it just wouldn't work. So I ended up putting a monitor and tube from a poker machine in it that was also recapped, the picture looks nice and vibrant now. BUT the tube has burn from the old poker game....its still playable but once you notice it's pretty hard not to see it. The 3D aspect of the game DOESNT WORK now having said that I have the dipswitch set to play in 2D mode and it plays fine. The motors for the 3D are still there and I still have the disks that cause the 3D effect if you're wanting to get that working again. Over all it's in very nice shape for the age. It has the original artwork and CPO and it even still has the step stool built in the bottom for kids to play it. Orginal coin mechs still work all lights work except one bulb above the scores. The buttons could use a good cleaning they are a little sticky but all the buttons do work. I also have the original owners manual that will go with it as well. It's a really neat game to have in my collection but it's so tall I can't maneuver it into my game room it measures right around 6ft 6in tall and is very very heavy. There are wheels on the bottom from the factory but on carpet they dont work to well. I would like $1000 for it but I would negotiate with a serious buyer. This is my first sale on this site so any tips are appreciated. I'm located in the Topkea Kansas area. The pictures of the sides were taken at the warehouse when I found it before I wiped the decades of dust off. If there are any questions dont hesitate to ask!
Attachments
Last edited:
