RalphT3
Well-known member
All of a sudden, my STUN Runner controller doesn't work. I have put it in test mode and in the "Control Inputs" screen, they all work, but when taken out of test mode and in play mode it doesn't work.
Also just replaced the power switcher, was putting out about 3.5V max and was making the speaker make a loud hum(at the lower voltage) and it rebooted every few moments. So if yours did this, this fixed it.
Could the power supply low voltage be a cause of the controls not working in normal play mode and work in test mode?
This is the 1st board related problem in this game since I got it back in Oct. 09. The other problem was monitor related-replaced HOT,HV ceramic cap replace, and a cap kit.
Also just replaced the power switcher, was putting out about 3.5V max and was making the speaker make a loud hum(at the lower voltage) and it rebooted every few moments. So if yours did this, this fixed it.
Could the power supply low voltage be a cause of the controls not working in normal play mode and work in test mode?
This is the 1st board related problem in this game since I got it back in Oct. 09. The other problem was monitor related-replaced HOT,HV ceramic cap replace, and a cap kit.
