Stuff that I need out of my way...

mudmantim

Active member
Joined
Feb 20, 2005
Messages
2,084
Reaction score
2
Location
Vermontville, Michigan
Rating - 100%
6   0   0
1. Carnival (W) –sorta working - - $100 PENDING
2. Centipede (W) – needs put back together – monitor work - - $250
3. Circus (NW) x2 - - $100 (for both)
4. Kaos (NW) – have all parts including a supposed working boardset - - $100
5. Off the Wall (W) - - $200
6. Omega Race cockpit (NW) - - $250
7. Omega Race cocktail (was working, not sure now) - - $250
8. Qix (NW) - - $250
9. Red Baron (NW) – If I remember right, all it needs is one board and it will work 100%, everything else is suppose to work - - $350
10. Road Riot 4wd (W) – needs monitor - - $100
11. Space Invaders Deluxe (?) – I think it worked with the Space Invaders/Space Invaders Deluxe multi-switch installed - - $150
12. Space Zap (W) - - $300
13. Super Shifter (NW) – mostly working though, seat is chewed up on one side - - $400

Pictures can be found right here.

I also have a couple smaller Anaconda's and a few small Boa Constrictors for sale as well...along with a few large aquariums suitable for reptiles (not fish).

Prices are negotiable with quick sales. Delivery is an option IF you are within a short distance. Pick-up is preferred and you are free to set up your own delivery if you wish.

I have a lot more than this on the chopping block but I need this stuff gone first.

PM or e-mail ([email protected]) me for any information you want on any of this stuff, I can give you all that I know about certain items.

Thanks.
-Tim

DSCF0237.jpg


99be.jpg


DSCF0003.jpg


DSCF0029.jpg
 
Ok, here's the deal with the Centipede; Everything worked when I last messed with it. It has a new lighted trackball, new lighted buttons, new control panel overlay and new t-molding. The monitor works but I didn't figure out the sync in the Centipede cabinet, I'm not 100% if the chassis is still in it or not but I believe it is.

I actually got this cabinet after it was converted to a golf game. It had woodgrain laminate on the sides that I removed. There is a spot or two on one side that actually looks like bondo or something was sanded on it, it's not too bad actually.
Anyway, my Dad use to play Centipede whenever he saw one back in the day, so I figured that I would fix it up for him. I got all the parts necessary for it (guaranteed working), including the new parts and was in the process of getting it fixed up for him. Before I actually got it all hooked up, he decided to move into a small single-wide mobile home, resulting in no room for a game. So, the game got pushed aside and that's the way it sat. I haven't messed with it in a while, I don't have any way to double check the PCB anymore, but everything did work. The game has always been kept inside and never in really cold or hot temperatures, so there shouldn't be any reason why it all doesn't still work.

I am located in the Vermontville area (49096).

-Tim
 
sounds like a movie "SNAKES IN AN ARCADE" we can have samuel jackson in it!!! GET THESE F**KING SNAKES OUTTA THIS MOTHER F**KING ARCADE"

i couldnt resist... good luck on the sale thought...:)
 
Love the Space Zap and the Qix. The bezel and marquee on that Qix is so much nicer than mine. Thank god your so far away because I want way more than I have room for! Good luck on the sales.

-VJ
 
I think I actually saw Tim's garage floor in one of those photos.....is that possible??? Photo-shopped? ;)

Just wanted to say 'Hi Tim'!....Tell Max I said 'Hey' as well....
 
Last edited:
I think I actually saw Tim's garage floor in one of those photos.....is that possible??? Photo-shopped? ;)

Just wanted to say 'Hi Tim'!....Tell Max I said 'Hey' as well....
It must of been an old picture Alan, lol. Actually, it's getting a bit cleaner...you'll have to come over and get a game or two to help me out. I know there has to be something here of your liking.

Max needs a big hug! But, seriously, Max is small compared to a few of my newest kids.

DSCF0108.jpg


DSCF0113.jpg


-Tim
 
1. Carnival (W) –sorta working - - $100 PENDING
2. Centipede (W) – needs put back together – monitor work - - $250
3. Circus (NW) x2 - - $100 (for both)
4. Kaos (NW) – have all parts including a supposed working boardset - - $100
5. Off the Wall (W) - - $200
6. Omega Race cockpit (NW) - - $250
7. Omega Race cocktail (was working, not sure now) - - $250
8. Qix (NW) - - $250
9. Red Baron cockpit (NW) – If I remember right, all it needs is one board and it will work 100%, everything else is suppose to work - - $350
10. Road Riot 4wd (W) – needs monitor - - $100
11. Space Invaders Deluxe (?) – I think it worked with the Space Invaders/Space Invaders Deluxe multi-switch installed - - $150
12. Space Zap (W) - - $300
13. Super Shifter (NW) – mostly working though, seat is chewed up on one side - - $400

Pictures can be found right here.

I also have a couple smaller Anaconda's and a few small Boa Constrictors for sale as well...along with a few large aquariums suitable for reptiles (not fish).

Prices are negotiable with quick sales. Delivery is an option IF you are within a short distance. Pick-up is preferred and you are free to set up your own delivery if you wish.

I have a lot more than this on the chopping block but I need this stuff gone first.

PM or e-mail ([email protected]) me for any information you want on any of this stuff, I can give you all that I know about certain items.

Thanks.
-Tim
Updated list:

1. Carnival (W) –sorta working - - $100 SOLD
2. Centipede (W) – needs put back together – monitor work - - $250
3. Circus (NW) x2 - - $100 (for both)
4. Kaos (NW) – have all parts including a supposed working boardset - - $100
5. Off the Wall (W) - - $200
6. Omega Race cockpit (NW) - - $250
7. Omega Race cocktail (was working, not sure now) - - $250
8. Qix (NW) - - $250
9. Red Baron (NW) – If I remember right, all it needs is one board and it will work 100%, everything else is suppose to work - - $350
10. Road Riot 4wd (W) – needs monitor - - $100
11. Space Invaders Deluxe (?) – I think it worked with the Space Invaders/Space Invaders Deluxe multi-switch installed - - $150
12. Space Zap (W) - - $300 SOLD
13. Super Shifter (NW) – mostly working though, seat is chewed up on one side - - $400

Anybody else interested in anything before I bury everything in impossible ways to want to dig out for quite a while?

I'm even willing to trade multiple games for working ones that I really want, like a dedicated Jr Pac-Man, Tron, other games, or pinball machines.

Thanks.
-Tim
 
Last edited:
Have it sit in your living room until you are ready.

-Tim

Ha, good one. Nah, what I meant is I don't believe that that game comes apart and my doorway is too narrow to get that down to my basement. Plus the wife would not be too happy if anything is in the living room.
 
Ha, good one. Nah, what I meant is I don't believe that that game comes apart and my doorway is too narrow to get that down to my basement. Plus the wife would not be too happy if anything is in the living room.
The Red Baron is only 25-3/8" wide x 64-5/8" long x 60" tall...that's pretty small compared to some cockpits.

-Tim
 
Where in Michigan are you? How long will you store games before pickup?
You pay now and I will store games for a while, not years mind you (there has to be some sort of agreed upon time frame) but I'm not opposed to storing them for a while.
I think the longest that I've ever stored a game for someone so far was six months.

As long as I'm paid for the game in full, I am willing to work with buyers on this.

I'm in Vermontville, MI 49096.

-Tim
 
Back
Top Bottom