stuff for sale

ElfShotTheFood

New member
Joined
Aug 17, 2007
Messages
3,693
Reaction score
39
Location
point pleasant, New Jersey
Rating - 100%
12   0   0
Mr do pcb + jamma adapter $50 shipped

djr-00a donkey kong jr bootleg pcb similar to donkey king jr pcb.
it uses the standard nintendo classic pinout. 22 pin edge connector. single board, has sound amp and displays normal (non-inverted colors) video. $40 shipped *edit* $30 shipped *edit*
attachment.php

white microwave(under the g07) $10 pick up only.

working nintendo vs orange gun, with the harness that connects the gun to your vs wiring harness.
working vs board with hogan's alley chips, 1 set of nonworking duck hunt roms and ppu, never tried to find the problem with these, I don't have a rom burner/reader. $110 shipped

***how about both chipsets and the gun and harness for $75 shipped*** I can use the board for dr mario

attachment.php



nintendo vs 8-way joysticks, they are missing the dust washer that goes on top of the black plastic part, (2 available) $25 each shipped or both for $40 shipped


time soldiers pcb, was told it is working, but has a graphics glitch, a line through the player characters. $30 shipped. untested by me because I have still never hooked up the jamma harness I bought 1.5 years ago, maybe someday I'll have a jamma cab.

big event golf pcb, $20 shipped, ok, so the game sucks, but the board has a bunch of eeproms that could be used for good games, and it has a bunch of other potentially useful chips, as well as a set of ribbon cables. *edit* this board works 100% *edit*
 
Last edited:
welove80s, it play just like in the pic if your dk has an edge connector.


smello, I have no idea about the dk bootleg.


Ghostlyguy, there is a very small bit of burn on the monitor, you have to be looking for it to notice.
 
a nintendo inverter board works fine. a dk monitor may not have one though. they are not hard to find or hook up.

you can also flip the yoke wire to make the pic right side up, but that is a pain in the ass with the 20ez

i flipped every dip on the board, and none of them flipped the pic
 
Last edited:
Oh ok, thanks for checking. I'm looking for something more plug-and-play for my DK cabinet. Swapping edge connectors is one thing, but it would be a nuisance to constantly switch the inverter as well, and the yoke (and I didnt realize until now that its upside down). I'm acually running a Sharp XM-2001N but it still seems easier to wait for a deal on a Nintendo PCB.

Still a pretty good price though, good luck with the sale.
 
Back
Top Bottom