Strike Zone ticket redemption

Keeleon

Active member

Donor 2023-2024
Joined
Jun 16, 2023
Messages
322
Reaction score
53
Location
California, APO/FPO
So I got this machine for free and it actually works fine mechanically, it just has an issue where it automatically starts shooting as soon as it powers on like its been coined permanently.


I contacted the manufacturer and actually got some schematics, but their ultimate response is that it may need to be "reprogrammed" which will cost about $200. I dont know that I like it enough to invest that much into it, so Im hoping someone may be familiar with this machine and have an idea what to look at. Otherwise, I guess its jsut scrap >.<
 
the easiest thing would be to check the coin switches to make sure they are plugged in in the NO position. I've run across some machines where they were plugged in in the NC position so it just endlessly coined up.
if not that you may have a short in the wires or possibly at the board where the coin door wires come in.
 
Back
Top Bottom