NEW Street Fighter Deluxe Pneumatic Cabinet pickup

Got the game to start today. I jumped pins on the filter board. I need to make a new harness for the controls.

Also I partially took apart one of my punuematic buttons. The company that makes the punuematic cylinder is still in business. These seem to be reproducible.
 
Got the game to start today. I jumped pins on the filter board. I need to make a new harness for the controls.

Also I partially took apart one of my punuematic buttons. The company that makes the punuematic cylinder is still in business. These seem to be reproducible.

Do you have any photos to share or contact info on the cylinder? I'd appreciate whatever I can get
 
If I get a chance today I'll take pics.

Got my nos cushion covers in today thanks to Mylstar at Arcadefixit. He doesn't have many left and once they're gone thats it. I doubt more will show up considering how rare the streetfighter deluxe is.
 

Attachments

  • 20180719_104105.jpg
    20180719_104105.jpg
    333.4 KB · Views: 57
AAlright I took apart one on my buttons

The punuematic cylinder part are made by Smc cylinder.
Part numbers
Cylinder
# Cq2b32

Floating Joint
#J20-8-125
M8 x 1.25


 
Just an FYI, I reached out to SMC last week to order replacement Pneumatics cylinders. The got back to me Friday and the part number (on mine) was a custom builders part number and not one off the shelf. They are researching a replacement / substitution for me. I may fabricate a few extras controls if anyone needs one. Will keep you posted.

Brian
 
Just an FYI, I reached out to SMC last week to order replacement Pneumatics cylinders. The got back to me Friday and the part number (on mine) was a custom builders part number and not one off the shelf. They are researching a replacement / substitution for me. I may fabricate a few extras controls if anyone needs one. Will keep you posted.

Brian
but what of the rubber cushions. Can new one be made out of rubber molds.
 
Found the top pcb of another pneumatic street fighter pcb. Searched everywhere for the other part and didn't find it. If I dont get this 2nd(6button) street fighter cabinet. I might convert my extra 6 button pcb into a 3rd pneumatic pcb and sell it.
 

Attachments

  • 20180820_145145.jpg
    20180820_145145.jpg
    512.3 KB · Views: 55
Found the top pcb of another pneumatic street fighter pcb. Searched everywhere for the other part and didn't find it. If I dont get this 2nd(6button) street fighter cabinet. I might convert my extra 6 button pcb into a 3rd pneumatic pcb and sell it.

But who else has the hardware to complete a pneumatic cab?
 
Need to know where I can order the connector for the pins of the left. Anybody know the size?
 

Attachments

  • 20180602_190716.jpg
    20180602_190716.jpg
    512.2 KB · Views: 51
  • 20180531_200100.jpg
    20180531_200100.jpg
    301.3 KB · Views: 45
Good thread on SF1, and I am enjoying the pics of your cab!

I got to play a pneumatic cabinet at the arcade in South Park Mall in Moline, Illinois (Quad Cities-area) about a year after SF2 was released. I was not able to figure out the controls right away, so I only played it once or twice, but it was cool to see. I think the South Park Mall arcade must have had it from years before and only put it back out on the floor after SF2 hit it big and they were trying to see if its predecessor could get a few tokens inserted.
 
Picked up another 6 button Street fighter. It has a Street Fighter 2 pcb. It also has a rigged up nintendo sanyo ez 20 monitor and donkey kong power supply in it
 

Attachments

  • 20181029_214758.jpg
    20181029_214758.jpg
    287.5 KB · Views: 44
Back
Top Bottom