dealerjim
New member
New guy here. 
Recently bought a Ms Pacman cocktail with a WG K4900 that had blue jail bars and a 4" x 2" blacked out spot in the lower left hand corner that had no image at all. I bought and installed a cap kit which fixed both issues and the monitor looked as good as new after some slight adjustments to the convergence.
Fast forward to a week later. I turned the machine on and the right side of the screen looks as if there's been a large magnet sitting next to the cabinet. I can open the cabinet, tilt the monitor out and it looks perfect, close it and it discolors again. I'm at a complete loss on this one. Any help would be most appreciated. Pictures listed below:
Cabinet Opened
http://midsouthmuscle.com/images/IMG_1252.jpg
Cabinet Closed
http://midsouthmuscle.com/images/IMG_1253.jpg
Recently bought a Ms Pacman cocktail with a WG K4900 that had blue jail bars and a 4" x 2" blacked out spot in the lower left hand corner that had no image at all. I bought and installed a cap kit which fixed both issues and the monitor looked as good as new after some slight adjustments to the convergence.
Fast forward to a week later. I turned the machine on and the right side of the screen looks as if there's been a large magnet sitting next to the cabinet. I can open the cabinet, tilt the monitor out and it looks perfect, close it and it discolors again. I'm at a complete loss on this one. Any help would be most appreciated. Pictures listed below:
Cabinet Opened
http://midsouthmuscle.com/images/IMG_1252.jpg
Cabinet Closed
http://midsouthmuscle.com/images/IMG_1253.jpg
Last edited:
