Strange Berzerk Issue

SkippyJoe777

Member
Joined
Mar 10, 2010
Messages
305
Reaction score
4
Location
Washington
Have a weird Berzerk issue. Have to turn the machine on and off about 3 or 4 times before the test tones will start for boot up. There is one single tone then two tones. Then a single tone then four tones. After the Attract mode finally comes up if you start a game, the Robots and the Player leave behind little dots that will kill the players and robots if you run into them. (See Video) Any help would be appreciated! Hopefully someone has seen this before!

http://www.youtube.com/watch?v=BQzQNo9k1C8
 
What happens if you hit the reset button on the top/left board after turning it on the first time. Possibly a power supply problem.
 
Try reflowing all the header pins on the power supply. Mine had trouble booting and I would have to cycle it a few times or leave it on for a few minutes before the boot sequence would start. I didn't have the problem with the dots though.
 
Back
Top Bottom