Still looking for parts for nanao 05B20085D1

Markio

New member
Joined
Jun 29, 2008
Messages
192
Reaction score
1
Location
Ohio
I'm pretty sure that I found the hot fmv-3gu but there is no picture to be sure!
http://www.encompassparts.com/products/?MSC&start=5901


I also found a pdf file of the crazy taxi manual. Although nothing very specific to the monitor. http://segaarcade.com/pdfs/crazytaxi/ct-standard-manual.pdf

Is there a way to just figure out the values of the caps individually and put together my own capkit?

Should I just try to install the new HOT when I get it and see if that works or does anyone foresee a problem there?
Thanks for the help I am just really lost on this one
Link to my original thread http://forums.arcade-museum.com/showthread.php?t=104864
 

Attachments

  • 100_5323.jpg
    100_5323.jpg
    83 KB · Views: 8
  • 100_5325.jpg
    100_5325.jpg
    86.2 KB · Views: 7
  • 100_5336.jpg
    100_5336.jpg
    96.8 KB · Views: 8
  • 100_5338.jpg
    100_5338.jpg
    81.3 KB · Views: 3
  • 100_5344.jpg
    100_5344.jpg
    92.5 KB · Views: 4
Is there a way to just figure out the values of the caps individually and put together my own capkit?

Yep, read each value off the caps that are installed. If you're definitely doing the kit, you can pull each cap one by one, and write down the location and value. Once you have the complete list, you can order them from Mouser or Digikey or somewhere, then put them according to your list when they get there.....
 
Back
Top Bottom