Stern/Konami Tutankham Jamma conversion

1500points

New member
Joined
Sep 2, 2011
Messages
5,706
Reaction score
107
Location
Iowa
Anyone have any experience with setting up a Tutankham PCB with the Konami/jamma connector?

I'm wondering how complicated this project would be, before it starts.
Is it straightforward or does it involve anything I wouldn't be aware of?

Any recommendations or tips?
 
Tips..

- Tutankham needs -5 volts. Make sure your Jamma harness has a -5v wire and that it is connected to your power supply.

- The Konami to Jamma adapter has a jumper for -5V isolation. Make sure your adapter has the jumper and that it is across both pins so that the -5V can flow.
 
Back
Top Bottom