started restoring a sorcerer......sound problems

woodrailsrus

New member
Joined
Oct 9, 2008
Messages
433
Reaction score
1
Location
jennerstown, Pennsylvania
hello
i started restoring a sorcerer pinball today and am having troubles with the sound. the speech that says "sorcerer" and "i am the master (?)" is very very faint. it was louder when i bought the game originally. HOWEVER when i turn the white plastic knob on the sound board up the whole way then you cant hear the speech at all, but when i turn it down just a little you can hear it very faint. ALL other noises and sound works fine.

does anyone know where to get plastics for this game?
 
Try reseating the speech roms and also there's a volume knob in the bottom cabinet on left hand side try adjusting that also. Mike
 
hello
i started restoring a sorcerer pinball today and am having troubles with the sound. the speech that says "sorcerer" and "i am the master (?)" is very very faint. it was louder when i bought the game originally. HOWEVER when i turn the white plastic knob on the sound board up the whole way then you cant hear the speech at all, but when i turn it down just a little you can hear it very faint. ALL other noises and sound works fine.

does anyone know where to get plastics for this game?

What does it sound like with the pot in the middle? Maybe it's working opposite to what you would expect. If not then I would consider a cap kit and new pots.
 
Last edited:
Back
Top Bottom