stargate problem

jpk0652

Permanently Banned
Joined
Dec 10, 2009
Messages
629
Reaction score
0
Location
Georgia
Just put a new power supply in my stargate and now it wont credit up. Checked the wiring to the door and all looks good. Before the original power supply crashed it credited fine. Any help would be appreciated.
 
Trace the ground wire going to the coin door. You probably messed it up when replacing the power supply.

ken
 
Certainly.... but if it registers in the switch test and yet still doesn't "coin up"...then there are other issues.

Just something to utilize while testing.
 
If he trashed the ground to the coin door, the switch test may not work either. It should, as it is supposed to go back to the connector on the ROM board, but.....

ken

Certainly.... but if it registers in the switch test and yet still doesn't "coin up"...then there are other issues.

Just something to utilize while testing.

If he installed a switcher, most people forget to hook up a ground for the coin door to replace the one provided by 4P3 pin 6.
 
Back
Top Bottom