FS Parts: Stargate Mini Control Panel Repro

taylormadelv

Well-known member
Joined
Dec 7, 2008
Messages
1,839
Reaction score
43
Rating - 100%
55   0   0
Up for sale is a custom cut Stargate Mini control panel. This was cut by member Jeff412 to my exact specifications. It fits a Williams Mini cabinet perfectly. It measures 17" X 9" X 3/4" and has the perfect angle cut on the back so that the cp will close perfectly in a real Williams Mini. A t-moulding slot has been cut in the front, just like the original. I had Jeff mortise out a spot for a Nintendo 2 way joystick to be installed, see photo. This has a very nice, brand new cpo from Arcadeoverlays and is of very good quality. I installed the cpo and cut all the button and 2 way joystick holes. Then I discovered an original CP and this became an extra part. The cpo alone cost $35 and the wood was about $25.
I will sacrifice this for $25 shipped lower 48 or PM an offer!
stargateminicp1-2.jpg



stargateminicp2.jpg


stargateminicp4.jpg


stargateminicp3.jpg
 
It's just a mortise that can be filled, no biggie.
Anyways, this is still available.
 
Back
Top Bottom