Good Afternoon all!
I was having several issues with my G07 , the horizontal seemed to be out and couldn't get it adjusted. So I ordered a recap kit, and new pots for the unit.
During the wait I saw one listed on Facebook marketplace close to me with a cocktail style frame. So i went and picked that one up, When hooked up it worked fine! I was overjoyed.
Seeing this i followed along with a video of someone cleaning up a G07 tube and chassis on the original tube and chassis.
G07 rebuild in real time
Instead of removing the frame, I tried using my existing tube (after waiting 24+ hours to make sure it's dry) and moved the boards over. When I connected them and turned it on, all I saw was the tube (?) flash a moment and go out, and the
fuse blew that is soldered to the board. I soldered a new fuze on the board, and moved it back to the original chassis but have nothing showing on the screen now. I assume that I somehow blew the flyback?
I don't think I did anything incorrectly. What could I have done that might have caused this, or is this a normal occurance?
Original photo of weird screen, and new monitor working attached