Star Wars WG6100 blurry picture issue

Spyridon

Well-known member
Joined
Nov 1, 2007
Messages
7,849
Reaction score
242
Location
Chester Springs, Pennsylvania
My WG6100 picture starts out great. Nice crisp picture, but after a few minutes, the picture starts to get blurry and eventually, the monitor picture just turns off. Sometimes you can hit the side of the cab and the picture comes back on.

B+ measured 179V with the picture on. When the monitor goes black, B+ is really low. Monitor has the LV6100 low voltage mod.

Any suggestions?
 
My WG6100 picture starts out great. Nice crisp picture, but after a few minutes, the picture starts to get blurry and eventually, the monitor picture just turns off. Sometimes you can hit the side of the cab and the picture comes back on.

B+ measured 179V with the picture on. When the monitor goes black, B+ is really low. Monitor has the LV6100 low voltage mod.

Any suggestions?

Check to make sure the focus assembly didn't come unplugged under the little boots that go to if from the HV cage. Those little connectors can slide off and cause you problems. It is usually hard to find the problem because the little boots can hide the issue.

If that is all plugged in nice, check for cold solder joints on all of the headers.

-VJ
 
Back
Top Bottom