Star Wars vector alignment

DreamArcades

Member

Donor 7 years: 2015-2017, 2020-2023
Joined
Apr 27, 2015
Messages
191
Reaction score
11
Location
Folsom, California
I've got 4 working Star Wars boards (yes, they are up for trade), but two of them I have not been able to get into alignment. I searched around and wasn't able to find a good guide to aligning them, so maybe it's just that I can't get them aligned properly, but since I got the other two going with minor tinkering, I am not sure.

Here's the photos:
IMG-9629.jpg

IMG-9628.jpg


The colors are actually fine, just my bad photography skills.
Any suggestions?
 
Any errors reported by self test?

No, but the alignment is so bad in the self-test I'm not even sure what's it's suppose to look like. Though now that I think about it, I could plug in one of the good boards and compair the alignment pattern on it.
 
Put it in test mode and then turn on the power. It will emit a series of 16 tones... are they all the same or are some different?

You could swap the entire AVG board to pair it with a working main board, and/or swap in a known good AVG chip onto the AVG board.

Label everything first ;)
 
Back
Top Bottom