Star Wars Upright Problem

irobot

Active member
Joined
Jul 29, 2007
Messages
464
Reaction score
46
Location
Pennsylvania
The graphics on my upright star wars are breaking up, the objects (tie fighters, etc) are breaking up, stretching out vertically.

Sort of like istead of being say 1 inch by 1 inch they go to 3 inch tall by one inch, but messy and random.

what say ye?

Also, the sound will periodically become very loud and then go back to normal.

I recapped the AR board already.

Thanks
 
The graphics on my upright star wars are breaking up, the objects (tie fighters, etc) are breaking up, stretching out vertically.

Sort of like istead of being say 1 inch by 1 inch they go to 3 inch tall by one inch, but messy and random.

what say ye?

Also, the sound will periodically become very loud and then go back to normal.

I recapped the AR board already.

Thanks

Not sure about the sound but the graphcs problems, particularly if they only affect the 3D sounds like a mathbox problem. Have you put it in test mode and seen if it gives any matrix or divider errors? If it does then then it's likely a game board fault.
 
Back
Top Bottom