Museum of the Game® & International Arcade Museum® Forums

Got a question for you guys all with Star Wars Arcade uprights. I recently purchased an upright without the top area and the speaker area was removed. I was wondering if someone could get me some pictures in this area.
Case in point.
1.) How how the marquee bolt in?
1a.) Marquee, too what board, is there one going across? There are 3 bolts that are in the marquee they have to go to somewhere? Blind nuts somewhere?
2.) The marquee itself along the top on the back side of the marquee it is rounded does that just butt up to a flat piece which makes up the top of the cabinet.

I would love a couple of pictures in this area. Down side is that the marquee would have to be removed and the light / speaker housing removed, to take some pictures, I know a lot of work.
I have added some pictures to this post, a mockup of the wood / clamped on but that is reference only, where the melamine would be, used a a reference. Some other random pictures I could find of the back of the cabinet.
Another picture I am adding is as cross section I did in a CAD system showing the parts and how they would lay in the cabinet.

Colors are
Gray Marquee.
Green back top above back door.
Cyan is the main top area with vent.
Red is kind of the unknown piece not sure on this?
Yellow is the blocking / piece that might go all the way to other side where marquee bolts into? Again not sure?

Any help on this would be great.
"May the Force be with You"

Thanks
Erik
Back
Top Bottom