Star Wars Trilogy DX Amp board

Zinfer

Well-known member
Joined
Apr 19, 2008
Messages
4,497
Reaction score
32
Location
Lima, Ohio
The Star Wars Trilogy UR has a centering AMP for the joystick straight within the CP, however I can't seem to find it on the Deluxe version. The cursor is far off screen to the left. I've adjusted calibration however cursor is always off to far left.
I was thinking it was the AMP board until I found that there wasn't one, unless it's hiding from me. I've replaced both Pots in the stick. Any ideas?
 
have you checked for +5 and GND at the pots? I dont recall if the DLX version has the amp board, its a different joystick.
 
Star Wars Trilogy

This amp bd was redundant. Our engineer at Sega who designed the U/R cab did not know this so included it in the build since it came with the joystick. The Dx was built correctly with the nice Sanwa Joystick so no amp bd came with it. All calibration on STW goes thru software. If you have a problem with X/Y, verify what pots are doing in input test. Center should be hard set at 80h for both. If this is so, calibration will work fine, provided calibration is performed correctly. Instruct on screen are a little wonky.
 
Back
Top Bottom