Star Wars Sit In Screen issues.

TobyH

New member
Joined
Apr 29, 2019
Messages
27
Reaction score
0
Location
Missouri
Ok, so its been about 5 years since i've been on here. I had originally posted about restoring my '83 Sit In Star Wars game. Long story short, restored the machine and had boards "fixed" by local guys referred to by some on here. After getting everything back i started to have screen collapse after the machine was warm. Honestly, i put a cover on the machine and gave up. So, here I am again to see if i can get her working constantly, enough. Now when i turn it on, the screen is immediately failing. My question is, ditch the old 25" everyone loved, or is there any life in her? Also, once i'm to stage 2 and it just goes, i dont run into any pillars or die.
 

Attachments

  • 20250526_105200.jpg
    20250526_105200.jpg
    269.4 KB · Views: 7
  • 20250526_105211.jpg
    20250526_105211.jpg
    277.1 KB · Views: 8
  • 20250526_105221.jpg
    20250526_105221.jpg
    394 KB · Views: 8
  • 20250526_105224.jpg
    20250526_105224.jpg
    396 KB · Views: 7
  • 20250526_105253.jpg
    20250526_105253.jpg
    387.8 KB · Views: 3
  • 20250526_105438.jpg
    20250526_105438.jpg
    434.6 KB · Views: 6
I wonder if you may just need to turn down your brightness until the retrace lines disappear?

I'm sure your 25" monitor is either fine or can be fixed.
 
Back
Top Bottom