STAR WARS- No sound?

qbass187

Well-known member
Joined
Jan 17, 2010
Messages
3,228
Reaction score
189
Location
Suffield, Connecticut
Hey guys,
Just picked up an Atari STAR WARS the other day and when I got it home I turned it on, it fired right up and it played just fine...only problem is there is absolutely NO sound.

I cranked the volume to 11 and all I got was a thud noise every 4-5 seconds...

I contacted the seller and he said it worked 100% when he tested it.
I reseated the interconnect in the PCB to make sure that wasn't the problem as well as the cable that connects the sound board to the PCB and still nothing.

Anyone have this problem before?
Is it possible the sound board is bad?

Any help would be greatly appreciated.

Thanks, ERIC
 
Update:

Ok, I figured out the problem.

I replaced the sound board's CPU 68B09 at location 3K, the 6532 PIA at location 1E & the 6116 RAM at 1F/H.

That toook care of the issues and now I have all apropriate sounds.
 
Back
Top Bottom