Star Wars Episode 1 light saber issue

[Alky]

I think I will need to put in the correct chip before I can proceed, like for like makes sure there isnt an wild cards out there and everything is done right.

I can get the saber to glow still by grounding it so everything is fine except the damn chip I think. Ill have one to me in a day or so and I will update this post once I put in the correct chip.


Since Eagle cannot take money I will try to see about another contest for everyone. Ill see what I have around here and come up with something.

 

[EagleTG]

I think I will need to put in the correct chip before I can proceed, like for like makes sure there isnt an wild cards out there and everything is done right.

I can get the saber to glow still by grounding it so everything is fine except the damn chip I think. Ill have one to me in a day or so and I will update this post once I put in the correct chip.


Since Eagle cannot take money I will try to see about another contest for everyone. Ill see what I have around here and come up with something.

I would snag another ULN2803A while you are at it. Just in case.

Edit: The 2803's are used damn near everywhere in Pinball, never hurts to have a bunch of them on-hand.

 

[Alky]

I would snag another ULN2803A while you are at it. Just in case.

Edit: The 2803's are used damn near everywhere in Pinball, never hurts to have a bunch of them on-hand.

Well heres what happened. When the other guy replaced the second chip he dropped it out of the board and didnt notice it got put back in backwards. When we started the game it was all messed up and then we noticed the chip. We fixed the chip but we were unaware that the 2803 chip must have gotten fried in the meantime. So long story short we put in a new 2803 and the thing works great now.

Thanks again for all the help.

 

[EagleTG]

Awesome. Glad you got it sorted out!

 

[Alky]

Awesome. Glad you got it sorted out!

Its been a good day so far..