Star Wars DE Questions

GraviHome

New member
Joined
Jun 5, 2008
Messages
157
Reaction score
0
Location
California
O.K.... so I'm going through my Star Wars and I notice that there is no knocker... BUT, I also notice that there is a connector just sitting in the bottom of the cabinet and for the life of me I cannot figure out what it goes to... anyone have any idea?
 

Attachments

  • IMAG0218.jpg
    IMAG0218.jpg
    92.3 KB · Views: 13
  • IMAG0219.jpg
    IMAG0219.jpg
    97 KB · Views: 14
I have the same connector in my JP, hooked to nothing. I measure +5v DC between the grey-white wire and ground, nothing between the two wires, and nothing between the grey-brown wire and ground. I don't know why it is there and what they may have thought of using it for.

Edit: I tried to measure between the grey-brown and ground when starting a game to see if it might pulse for a counter, but I didn't see anything. I didn't try checking it when tripping the coin switches to see if it was for an external coin counter.
 
Last edited:
O.K.... so I'm going through my Star Wars and I notice that there is no knocker... BUT, I also notice that there is a connector just sitting in the bottom of the cabinet and for the life of me I cannot figure out what it goes to... anyone have any idea?

Well, the gray wires are not for the knocker, the knocker is the purple and brown wires that are clipped off in your picture.
 

Attachments

  • Star Wars knocker.jpg
    Star Wars knocker.jpg
    91.3 KB · Views: 19
Back
Top Bottom