Star Wars Board/power issue question.

solo742

Member
Joined
Jan 14, 2010
Messages
550
Reaction score
2
Location
Colorado
Is there a difference between boardsets for cabs with 6100's as opposed to Amplfone monitors?

The reason I ask is this: I have both (the second is sold already) and in the amplifone cab, the cardset was not working. Sent it off for repair, and while it was gone, I tried the other boardset I had (from an upright with a 6100. Came up OK, but the picture was smaller. I mean abour 8" by 10", not the full screen.

In the cab with the 6100, the picture is fine.

I know there is a power issue with the amplifone cab as it fried a chip on the boardset when it came back from repair, so I am wondering where to start looking so that I can make it work when the set is repaired again.

Also not sure why it fried the original boardset, but not the one for the 6100.

Any help would be great.

BTW: please take a look at the pics to see the chip that fried.
 

Attachments

  • P1010156.jpg
    P1010156.jpg
    95.7 KB · Views: 11
  • P1010157.jpg
    P1010157.jpg
    96.3 KB · Views: 13
  • P1010158.jpg
    P1010158.jpg
    81.2 KB · Views: 18
  • P1010162.jpg
    P1010162.jpg
    75.5 KB · Views: 13
There is no difference in the boardset,the difference is in the monitor sensitivity,you can turn up the gain pots on the board to get a full screen, I have no explanation for the fried chip, I may know more when the boardset gets back and I can have a look.
Dick
 
Back
Top Bottom