Star Trek Voyager Gun issue

Zitt

Member
Joined
Sep 6, 2008
Messages
767
Reaction score
15
Location
Austin, Texas
I took my star trek voyager upright to Texas Pinball fest last month and well... it was off for most of the show. I couldn't get the damn guns to calibrate. Both just would register on some shots on some parts of the screen but I couldn't get them to calibrate across the whole screen.

I tried lowering flash contrast and increasing it... nothing seemed to work.

Suggestions as to what to do?
Is my monitor starting to go? It might have been my imagination; but I think I saw the screen "wobble" when it flashes white. But again; may be just me imagining things.
 
I took another look tonight. I can get the guns to register intermittantly. The connections look ok to the gun and the lens was cleaned. I see the screen flash white when I pull the triggers.

I'm noticing that if I go into the games display test and cycle thru the greyscale colors... I see the screen's width shrink by about 1/8-1/4" as it goes to full white.

I'm wondering if the screen is loosing stability when I pull the trigger; which leads to the game being unable to detect targets.

Thoughts?
 
Back
Top Bottom