Star Trek SOS cage question

demogo

Well-known member

Donor 14 years: 2012-2025
Joined
Jun 30, 2007
Messages
14,951
Reaction score
2,102
Location
Texas
OK, so my Star Strek SOS card cage has gotten very picky about how the boards are plugged into it.

I'm now having intermittent video problems with my XY cards that I can cure by reseating or adjusting them slightly.

When I look in the card cage I can see the connectors at the bottom and they almost look like Jamma split pins.

Does anyone know if the pins in the connectors can be replaced with Jamma split pins? I think I may be forced to repin that connector for this one slot. And I suppose it would be smart to repin all of the other connectors as well.

Thoughts?
 
OK, so my Star Strek SOS card cage has gotten very picky about how the boards are plugged into it.

I'm now having intermittent video problems with my XY cards that I can cure by reseating or adjusting them slightly.

When I look in the card cage I can see the connectors at the bottom and they almost look like Jamma split pins.

Does anyone know if the pins in the connectors can be replaced with Jamma split pins? I think I may be forced to repin that connector for this one slot. And I suppose it would be smart to repin all of the other connectors as well.

Thoughts?

I would give Mike of VectorLabs a PM. He made some G-80 card extenders to make it easer to do board repairs. Not sure if the ones he uses would be a direct replacement for the back pane in the card cage but if not he may know where to get them.
attachment.php
 
Back
Top Bottom