Squawk and Talk questions

DanP

Member
Joined
Jan 30, 2008
Messages
171
Reaction score
23
Location
London, London, United Kingdom (GB & NIR)
Sorry for the cross post from RGVAC - looks like that group is dead now?

I've got a general question about the Squawk and Talk boards
as used in EDOT and various Bally/Midway Pinballs. Firstly are they
all pinout compatible? I've recently been looking at an S+T board I
bought a while back and it's different from the one I've got in my
EDOT. It appears to have more parts than the EDOT one, a couple of
power regulators and some volume pots. Also the EDOT one has a track
cut (that leads to the unpopulated section where the volume pots would
be). Can I use this one in my EDOT as-is or do I need to make some
modifications?

Any help appreciated.


DanP
 
edot

the edot is different then the pinball
You need to modify the jumpers on the pinball
and the pinball uses a different voltage in

I have one moded and will play the self test but wont work in game yet
still figuring out how
 
Back
Top Bottom