Spy hunter pinball no score lights working help

pinkpot

New member
Joined
Nov 2, 2010
Messages
1,771
Reaction score
13
Location
WEST, Michigan
everything on this machine works but the scoring
In the back box all the lighs ligh up and flash and stuff but nothing to the displays.

Checked wires and fuses (a few bad fuses but didnt do the trick)

I almost didnt ge this after reading the reviews. the reviews are wrong this is a fun pin!

I have no manual or any knwledge on bally midway pins ;)

Im more fluent in williams stuff

any help is appreciated...
have no idea were to start...do i mm or continuity?
 
For goodness sake, before working on your machine, buy a manual! You'll be lost without it.

i traded for the machine ,)
and have the manual on ipdb...
havent worked on it yet ;)
just checked the fuses and wiring...

figured id better ask questions as i really dont know crap on bally's where the display stuff is at..

looks like that section is on the power supply in the bottom of the cab the top right 2 molex connectors...????
 
high voltage section is shot...the bottom large green long cap at the bottom is juicing out some white flaky stuff.
so the mpu needs that done regardless.

Biggest question, do I have the driver high voltage repaired?
Or do I get the new displays that dont require the high voltage to work?


The display look realy nice aside from the boards on them being dirty and needing a brush down...

any ones thoughts?
 
i got a rottendog replacement and the displays fired right up...so it was for sure the high voltage section on the driver...
im gonna get some better soldering gear and fix her up ;)

got a new sticker for the front
and bought new small top flippers since 1 is cracked
havent done that yet so a new thing to learn for me ;)
 
Back
Top Bottom