Sports Station Wiring

friedfish

Active member
Joined
Apr 10, 2008
Messages
237
Reaction score
27
Location
Newark, California
I am attempting to install a sports station board in a gauntlet legends cabinet, but I cannot figure out what haness connections go where on the board even with the wiring diagram.

Instead of using the Guantlet Legends wiring harness I am looking to use a harness that had previously been used to install the game in a MKII cabinet. Unfortunately during the move, some of the wires were disconnected from the some of the connectors and now the games only powers up for a brief second. In addition, I did a poor job of marking things before the move.

Can someone take pictures of the connections from the harness to the board for me or instruct me on what connections on the board should be made? This a dedicated board for sport station so no need to worry about GL to SS sound board issues.

This cabinet is driving me craxy!!!
 
the only NECESSARY components to getting the game to work will be at the JAMMA harness. there should be a 9 pin molex plug for the power supply to plug into, if your Sportstation didn't come with the analog joystick interface board then you're going to need one to get this to work with your analog sticks.. Gauntlet had that built in.

even if you don't have your player 3/4 harnesses plugged in, the game should still run. so verify your power supply is connected right, and that you're getting 5.10V at the JAMMA edge. (the fine tuning can come later when you have it running)
 
Back
Top Bottom