Museum of the Game® & International Arcade Museum® Forums

Hi all,

I have some sparks between the monitor frame and the metal of the cabinet when i turn the monitor off and on.
There are plastic spacers between the cabinet stand and the monitor frame, form the factory.
Actually i did the following but nothing solved my issue:
- Tried another chassis,
- Isolated the chassis from the frame,
- Cleaned the pins on the tube (neckboard),
- Re-soldered the black cable turning around the monitor,
All options (lamp, psu, etc..) where disconnected. Actually the monitor is plugged directly to the AC outlet.

Once, i got no spark but he picture on the tube went very bright, quite completely white.

The video of the problem is here

Thanks a lot for your help and suggestions!
Back
Top Bottom