Space Invaders Braze Technologies Multi game Kit Not Working

Call Sign ACE

New member
Joined
Jun 2, 2015
Messages
26
Reaction score
0
Location
Torrance, California
Space Invaders Braze Technologies Multi game Kit Not Working

The Space Invaders game works without the Braze Technologies multi game Kit installed, but when it's installed, it shows garbage on the screen. What gives?

Their installation directions online refer to a troubleshooting guide link but the page is blank.

Is there something wrong with the kit or is there something else that needs to be done first?
 
My board says Taito so I'll try an EPROM inteded for Taito and see if that fixes it.

Nice chat yesterday!
Midway and Taito are 2 different animals...as I said, you're not the first or the last to assume your pcb is a midway... ;)

Thanks for posting for others that search can check their pcbs when ordering from us.

Shipping out today for you. Hope your daughter enjoys it!
 
Arn't the differences obvious?
- taito is a stack (with ribbon cables)
- midway is an "L" angled setup

You need one that looks like this ->

si-pcb1.jpg


Or am I wrong here? :confused:

http://www.brasington.org/arcade/products/sim/install.shtml
 
Arn't the differences obvious?
- taito is a stack (with ribbon cables)
- midway is an "L" angled setup

You need one that looks like this ->

si-pcb1.jpg


Or am I wrong here? :confused:

http://www.brasington.org/arcade/products/sim/install.shtml



I think there is also a Taito "L" shaped Space Invaders pcb. I've never seen one in person, but I recall seeing pictures on the internet when researching my trimline. I think the brackets that hold the boards are more rectangular than the triangle shaped Midway brackets.
 
Back
Top Bottom