Sorcerer letter targets help...

OldTymeToys

Well-known member

Donor 3 years: 2011, 2013, 2018
Joined
Apr 2, 2009
Messages
12,839
Reaction score
1,142
Location
Canonsburg, Pennsylvania
I went to play my Sorcerer last night to log some scores for the pinball league and I noticed right away that the S-O-R-C-E-R-E-R targets weren't registering. Normally, the lights flash and when you hit a letter target, those lights remain on until all are lit. This wasn't happening. No scoring, no sound when the targets were hit... not registering at all.

This is my first pin so I need some guidance as where to begin to look for the problem. So far, the manual isn't much of a help to me. :(

Thanks in advance for the help!
 
I'd look for a wire color common to all of them, and follow it around them and to other switches and connectors along the way back to the board and look for a wire broken off.

LTG :)
 
Cool, I can do that. I thought it would be something I would need to find in test mode and then revert back to the manual to find something in the schematics.
 
Back
Top Bottom