Museum of the Game® & International Arcade Museum® Forums

I have a Taito cabinet with a hacked up harness, so I bought a reproduction harness from Bob Roberts. Everything is seemingly working after wiring up a Jungle King board, with the exception of the coin switches and the service switch. I have them wired up according to the schematic below, and have tried more than one Taito door with it (each door has an intact Taito coin door harness) but neither one will coin the game up or activate the service switch. I do not have the coin counter or the lockouts wired up, nor do I have slam/tilt wired. So, I have 12V (for the lights on the door and this works fine), GND, Coin1 and Coin 2 connected. I have tried just jumping Coin1 to GND and Coin2 to GND but get nothing. What am I missing here?


1754185992670.png
Back
Top Bottom