Solved! Sanyo 20-Z2AW issue after recapping

Patnukem

Member
Joined
Aug 31, 2009
Messages
319
Reaction score
23
Location
Nebraska
Been working on this PC10 and the first monitor recapped without issue the 2nd one is giving me trouble. Previously it blew a fuse after recapping. Double Checked all new caps found 1 wrong cap after reviewing the list of caps vs what I had in there (I moved a decimal over it seems) and a short. After fixing these (seems someone recapped it 14 years ago about based on the length of time previous owner had it) now it works and no more eating fuses but seems to be blurry and maybe red missing… can't adjust it but B+ is 108.2 volts. Any suggestions. Included pictures of before and after cap kit.IMG_1602.jpeg
 

Attachments

  • IMG_1604.jpeg
    IMG_1604.jpeg
    1 MB · Views: 7
I found some issues on the neck board and fixed them. Now I get a high pitched whine with no image and the other fuse blew the DC fuse
 
I suspect the flyback failed and took out the HOT replaced both and it's now working.
 
Back
Top Bottom